You have just entered your car to leave for the workplace in the morning and no matter how many times you turn the key in the ignition the engine would power up. Chances are, your battery is dead and it needs to be boosted with the help of a donor vehicle. It is always better to be prepared for the worst before you hit the road, as that would ensure that you are carrying all the emergency tools that can come in handy during unforeseen events.
Before having a look at the engine block of your defunct car, you should ensure that you have a jumper cable in the trunk. Your body should not be wet when you are handling with these high-voltage cables. Make sure to connect the red and black clamps to positive and negative terminals of the battery respectively. After you have connected the jumper cable with the disabled auto, you would have to repeat the same procedure to set up a connection with the other car. Make sure that you are not engaging the starter more than 15 seconds in each attempt once the engine of the donor vehicle is turned on. If you are left stranded in an unknown location with no passerby vehicles and looking for a reliable car battery boost service, then make sure to refer to the webpage Tow Truck North York now for more information.
It is advisable to use 2 gauge or 4 gauge jump-start cables, as they have desired levels of thickness to carry out the engine startup process in a safe manner. You should also park both vehicles as far away as possible, as that would eliminate the chances of any hazardous sparks. By following these guidelines, you would be able to boost the dead battery of your car.